Male engineer in an orange hard hat crouching to adjust a valve fitting on a bank of industrial centrifugal pumps in a plant room, with green motor housings and grey-insulated pipework behind him

Building maintenance

Every certificate current. Every engineer visible. Every job invoiced.

Building maintenance runs across sites nobody visits every day. Certificates lapse before anyone notices, engineers report in by phone, and remedial work found on a routine visit gets forgotten before it reaches an invoice.

Joblogic gives operations managers, contract managers and finance managers one record for every certificate, every engineer and every job across the portfolio, so nothing lapses unnoticed and remedial work turns into revenue instead of a write-off.

Where building maintenance work quietly slips

Certificates go quiet, engineers go unseen, and the paperwork behind a completed job goes missing.

No warning before a certificate lapses

You find out an EICR or gas certificate has expired when a client asks for it, not before, so a routine renewal turns into an emergency you’re now explaining.

No one can say where a site actually stands

A client rings to ask if the engineer’s turned up yet and the office is guessing from a diary that hasn’t been updated since the morning, if that.

No two site inspections look the same

One engineer’s EICR notes read like a checklist, another’s read like a text message, and neither tells you whether the emergency lighting was actually tested that day.

Remedial work that never becomes an invoice

The client asks why a job was never invoiced, and the answer is three weeks old: an engineer’s aside on site that got mentioned, not logged, and then forgotten.

Where building maintenance connects to the wider risk

Hands using a laptop on a desk showing the Joblogic job and asset list table with compliance status columns

Prove every certificate without a scramble

Pull the EICR, PAT or gas record for any site the moment a client, insurer or inspector asks, not the week after.

Tablet on a surface showing the Joblogic job map view with location pins on a UK map and a job list panel on the right

See every engineer without ringing round

Know where every engineer and every job stands across every site you maintain, instead of calling each one to find out.

Close-up of a hand in a yellow hi-vis jacket using a smartphone while holding a white hard hat

Cut the admin that grows faster than the job

Replace the diary, the spreadsheet and the phone calls with one system that doesn't need more people every time you add a site.

Desktop monitor on a desk showing the Joblogic reporting dashboard with multiple donut charts and a bar chart for KPI metrics

Turn remedial work into revenue, not memory

Carry the extra work an engineer spots on site straight into the quote and the invoice, so it gets paid for instead of forgotten.

Smiling male professional with a bun hairstyle using a laptop at an office desk

Add sites without adding the same chaos

Set up a site once, certificates and all, and repeat it for the next one without rebuilding what already works.

One system for every site you maintain

Certificates, jobs, engineers, and invoices, tracked from first inspection through to final payment.

Catch renewals before they lapse

Inspection and certificate renewal dates generate automatically per asset and site, so a due date surfaces on the schedule weeks before it lapses, not after.

See every site without a phone call

Every job’s status updates as the engineer works through it, so you see where things stand across every site without picking up the phone.

Every inspection reads the same

EICR, PAT, and emergency lighting checks run through the same digital form wherever the site or engineer, so one inspection reads the same as the next.

Turn site work into an invoice

Remedial work an engineer flags on site carries straight into the quote, and the completed job converts to invoice without a separate step.

Don’t lose sight as you add sites

Certificate status, job progress and invoicing sit on one dashboard across every site you cover, so adding sites doesn’t mean losing sight of the ones you already run.

Documented. Defensible.

Every EICR, PAT result, emergency lighting test and fire risk assessment attaches to the asset and the site the moment an engineer signs it off, not written up later.

When a housing association client, an insurer or a fire inspector asks for proof tomorrow, you pull the record instead of piecing one together from vans and old paperwork.

Person at a desktop showing the Joblogic reporting dashboard with donut charts, KPI tiles and a bar chart

The proof, not the pitch

Joblogic has enabled us to provide real-time information to our clients without the need for various other software platforms. The engineers are tracked, meaning greater ETAs can be provided.

Chris ClaypoleMaintenance ManagerBeechcroft BMS
75-100+ engineersmanaged on one platform without added operational complexity, per live case study
95% less paperworkacross job records and compliance forms, cross-vertical platform figure
80% mobile app adoptionof engineers logging jobs and certificates directly from site

What it means for your team

Who this touches depends on how big your operation is. A five-person building maintenance contractor runs everything through one person; a national multi-site portfolio splits it across a full team.

Business Owner

The certificate that proves a site is compliant exists the day the work happens, not the day a client, insurer or inspector asks to see it.

See how it works for owners

Operations Manager

Engineers, jobs, and site status are visible across the whole portfolio, so a diary that hasn’t been updated stops being the only source of truth.

See how it works for operations

Finance Manager

Remedial work an engineer spots on site carries straight through to the invoice, so completed jobs stop sitting unbilled while the paperwork catches up.

See how it works for finance leaders

Contract Manager

You manage renewal across several client contracts, each with its own SLA and inspection schedule. Joblogic builds that record automatically, so renewal starts from proof, not a scramble.

See how it works for contract managers

Estate Manager

Your asset and certificate record spans a portfolio you can’t inspect every week. Joblogic tracks every EICR, PPM date and inspection result against the actual site, not a spreadsheet.

See how it works for estate managers

Engineers actually use it, certificates too

Across Joblogic customers, 80% of engineers use the mobile app day to day, a cross-vertical figure rather than one exclusive to building maintenance. On site, that means the EICR, PAT result or emergency lighting log gets completed on the phone, the same shift Response Building Maintenance made when it moved off time sheets and manual processes.

Male engineer in a white hard hat and yellow hi-vis vest smiling and tapping on a tablet at an industrial plant site

Fits the way you already run your sites

Works with the accounting and compliance tools you already use, and scales as your portfolio grows.

Accounting platforms

Connects to Xero, Sage, and QuickBooks, so job costs and invoices flow through without re-keying figures by hand.

Sites and client contracts

Set up each site and client contract once, with its own inspection schedule, and add more without rebuilding what’s running.

EICR, PAT, and fire safety

Certificate and inspection records map to BS 7671, PAT testing and fire risk assessment requirements, not a generic compliance category.

Building maintenance questions

Can it track EICR, PAT, and emergency lighting dates by site?

Yes. Every EICR, PAT result and emergency lighting test is logged against the site and the asset, with renewal dates tracked automatically. You see what’s due, what’s overdue and what’s just been completed, across every site you cover, without checking each one by hand.

Does it handle reactive callouts and planned work together?

Yes. Reactive jobs and PPM-scheduled visits run through the same system, on the same engineer diary. A reactive callout doesn’t sit outside your planned maintenance record; it becomes part of the same site history, alongside the certificates and inspections already scheduled there.

Do we have to give up our spreadsheets straight away?

No, most contractors move site by site rather than in one cutover. Historical certificates and job records can be imported, and your team keeps working through the transition instead of stopping to switch systems. A named contact runs the plan with you.

Can subcontractors log jobs without full account access?

Yes. Subcontracted or freelance engineers get access scoped to the jobs and sites you assign them, so they can log job completion and certificates without seeing the rest of your account. The certificate trail stays yours even when the hands doing the work aren’t your direct employees.

Is this sized for a handful of sites or a large portfolio?

Both. Most building maintenance customers start with a defined patch, often a single client’s sites or one region. The same certificate, scheduling, and invoicing structure holds as you add sites, clients or subcontractors, without needing to move to different software.

Can we produce the reports our housing association clients want?

Custom dashboards and exportable reports cover job status, compliance evidence and SLA performance per site or per client, which covers most housing association and landlord reporting asks. Any specific report format a client contract requires is confirmed and configured during implementation, not guaranteed out of the box.

See it across your portfolio

Thirty minutes on your own portfolio: how certificates track against every site, how engineers and jobs stay visible without a phone call, and how remedial work turns into an invoice.